Файлы пользователей

Instrucciones para configurar macros para el Logitech X56 Rhino HOTAS y poder utilizarlas en DCS con los módulos A-4E, Av-8B, F-104G, F/A-18C, Jf-17, Ka-50, MB-339PAN, Mi-24P, MiG-21bis, MiG-29S, Su-25A, Su-25T, Su-27, Su-33, J-11A y T-45. Va también un perfil para el TrackIr 5 y una configuración de Reshade para una apariencia un poco más realista.

************************************************************************************************************************************************************************

Instructions to configure macros for the Logitech X56 Rhino HOTAS and be able to use them in DCS with the modules A-4E, Av-8B, F-104G, F / A-18C, Jf-17, Ka-50, MB-339PAN, Mi- 24P, MiG-21bis, MiG-29S, Su-25A, Su-25T, Su-27, Su-33, J-11A and T-45. There is also a profile for the TrackIr 5 and a Reshade setting for a slightly more realistic look.

Save file default location C:\Users\User Name\AppData\Roaming\NaturalPoint\TrackIR 5\ProfilesFor TrackClip, set Speed to 1 and Smooth to 50 - Profile has a dead zone so it easily snaps to the centre, it can be a little on the quick side so if need be the speed can be adjusted (try .5), enable Truview and enjoy!

User profiles for DCS World.

---Profiles for:
A10-C//
Bf-109K-4//
KA-50//
L-39C//
L-39ZA//
MIG-21Bis//
P-51D//
SU-25T//
UH-1H

---Hardware in use:
Hotas Warthog//
MGF Crosswind
TrackIR5

Inside there are PDFs with explanations of the various commands. I tried to create profiles that are very realistic to the real part of the module.

This is the Track IR 5 profile that I made for DCS A-10 but use for FC3 and P-51.

Here's a free mount for TrackIR if you've ever lost or broken one (I've lost 2). Got fed up with the replacement cost so I decided to design one myself.

Download them and then upload them to a 3D printing service and have them printed.
I prefer Nylon which is strong and maintains the small details but you can try PLA plastic although I don't recommend it.
Nylon will be a little more expensive but worth it. The printing will take about one week.

You'll also need 4 M2 x 12mm screws and nuts. I use nuts with the nylon insert so they don't loosen.
You can also glue the parts together.

You'll also need a small magnet and I've sourced one here: https://www.ebay.com/itm/374032601246
You'll need a couple drops of Super Glue and make sure you glue the correct polarity up / down.
I also glue velcro to the base and legs and then to the top of my monitor to keep it in place.

I don't know if they will fit Track IR 4 or 3.

Hope you like it and can use it courtesy of Combat King Simulation